Danfoss FC-051P1K5S2E20H3BXCXXXSXXX VFD | 1.5 kW, 200-240V, 1-Phase, IP20, Built-in EMC

Danfoss FC-051P1K5S2E20H3BXCXXXSXXX VFD | 1.5 kW, 200-240V, 1-Phase, IP20, Built-in EMC

Danfoss FC-051P1K5S2E20H3BXCXXXSXXX frequency converter full specifications. 1.5 kW, 200-240V 1-phase, 7.4A, IP20, built-in EMC filter, chassis. Complete VLT Micro Drive configuration.

Product Overview

The Danfoss FC-051P1K5S2E20H3BXCXXXSXXX​ is a complete order code for a VLT® Micro Drive FC-051 frequency converter, fully configured for motor speed and torque control. This model is rated for 1.5 kW (2 HP) output, accepts 200-240V single-phase AC input, delivers 7.4A output current, and includes a built-in EMC filter (Category C2). The extensive code defines every feature: "FC-051" is the series, and the suffix specifies power rating, supply voltage, enclosure, options, and accessories. This compact VFD provides sensorless vector control for pumps, fans, and conveyors with a comprehensive feature set as standard.

Technical Specifications (Decoded from Order Code)

Note: Specifications are decoded from the standard Danfoss FC-051 order code structure. The "XXX" segments typically indicate default/no-option selections. Dimensions and weight are approximate for this frame size.

Order Code Decoding (FC-051P1K5S2E20H3BXCXXXSXXX)

• FC-051:​ Series (VLT Micro Drive FC-051)

• P1K5:​ Power (1.5 kW)

• S2:​ Supply (200-240V, 1-phase)

• E20:​ Enclosure (IP20/UL1, Chassis)

• H3:​ Control Option (Digital/Analog I/O + RS-485)

• BX:​ RFI Filter (Built-in, EMC Cat. C2)

• C:​ Brake (No built-in brake chopper)

• X:​ Heatsink Coating (Standard)

• X:​ Control Location (Integrated)

• X:​ Control Cable (Not included)

• SX:​ Power Cable Kit (Not included)

• XX:​ Manual (English printed)

Key Features (as per configuration)

• 1.5 kW Power Rating:​ For 2 HP motor control.

• Single-Phase 230V Input:​ Common for residential/commercial applications.

• Built-in EMC Filter (Cat. C2):​ Reduces electromagnetic interference for compliance in residential environments.

• Sensorless Vector Control (VVC+):​ Good speed/torque control without encoder.

• Standard I/O:​ 2 AI, 1 AO, 4 DI, 1 Relay, RS-485 for basic automation.

• Integrated Control Panel:​ Graphic Local Control Panel (LCP) for programming and monitoring.

• Compact Chassis Design:​ Saves panel space.

• Fanless Cooling:​ Silent operation, high reliability.

Important Technical Notes

1. Motor Compatibility:​ For 3-phase AC induction motors. Match motor current (≤ 7.4A) and voltage (230V Δ/400V Y).

2. Input Power:​ Strictly for single-phase​ 200-240V, 50/60 Hz. Do not connect to 3-phase or 400V+ systems.

3. Enclosure:​ This is a chassis drive (IP20). It must​ be installed in a suitable enclosure (IP rating as required) for safety and environmental protection.

4. EMC Installation:​ The built-in C2 filter helps. For full compliance, follow EMC installation guidelines: use shielded motor cable, proper grounding, and correct cabinet mounting.

5. Brake Function:​ This variant (code "C") has no built-in brake chopper. For dynamic braking of high-inertia loads, an external brake resistor and chopper module are required.

6. Heatsink:​ Standard coating. Ensure adequate clearance for ventilation as per manual. Derate output at high ambient temperatures (>40°C).

7. Accessories:​ This code includes no extra cables or kits. Power, control, and communication cables must be sourced separately.

8. Application Macros:​ Includes pre-set macros for common applications (pump, fan, etc.) for quick setup.

Note: This is a decoded specification based on the public Danfoss FC-051 order code structure. For 100% accurate technical data, safety instructions, installation drawings, and parameter lists, consult the official Danfoss VLT® Micro Drive FC-051 Design Guide (MG.20.YY.41)​ and Programming Guide (MG.20.YY.51)​ corresponding to the hardware and software versions of this specific drive.