Danfoss ICS1 25-15 ICOS Compact System 1 | 25 kW, 380-480V, IP55, Compact Drive Package

Danfoss ICS1 25-15 ICOS Compact System 1 | 25 kW, 380-480V, IP55, Compact Drive Package

Danfoss ICS1 25-15 ICOS Compact System 1 specifications. 25 kW, 380-480V 3-phase, IP55 protection, compact drive system with integrated choke. Pre-engineered VFD package.

Product Overview

The Danfoss ICS1 25-15​ is a pre-engineered, compact drive system​ from the ICOS (Integrated Compact System) series. This complete package integrates a 25 kW (33.5 HP) frequency converter, input line choke, and necessary components in a single IP55 enclosure. The "ICS1" designation indicates the Integrated Compact System generation, "25" specifies the 25 kW power rating, and "15" is a configuration code. This all-in-one solution provides a space-saving, reliable variable speed drive system for fan, pump, and compressor applications, designed for quick and easy installation.

Technical Specifications

Note: Specifications are based on the typical Danfoss ICOS Compact System 1 series. The exact configuration for "ICS1 25-15" (e.g., included bypass, specific drive type, disconnect type) may vary. Always request the detailed data sheet for the specific order code.

Key Features

• All-in-One Package:​ Integrates drive, choke, disconnect, and protection in one IP55 cabinet.

• IP55 Protection:​ Dust-tight and protected against water jets for demanding environments.

• Reduced Installation Time:​ Pre-wired and tested system minimizes on-site engineering and wiring.

• Input Line Choke:​ Built-in choke protects the drive from power line disturbances and reduces harmonic distortion.

• Compact Design:​ Saves space compared to separately sourcing and assembling components in a larger cabinet.

• Optimized for Pumps & Fans:​ Often includes application-specific software (e.g., pump or macro) for quick commissioning.

• Standardized Design:​ Simplified selection, ordering, and maintenance.

Typical Applications

• Water & Wastewater:​ Pump control in treatment plants, booster stations, and irrigation.

• HVAC:​ Large fan and pump control in commercial buildings and industrial facilities.

• Industrial Cooling:​ Control of cooling tower fans and chilled water pumps.

• Compressor Control:​ Speed control for air compressors.

• General Industrial Machinery:​ Where a protected, pre-assembled drive package is required.

Important Technical Notes

1. Configuration Clarity:​ The suffix "-15" is a configuration code. It is essential to obtain the detailed technical sheet​ for "ICS1 25-15" to confirm the exact contents, such as:

   • Presence of a bypass solution​ (manual or automatic).

   • Type of main disconnect​ (switch-disconnector, circuit breaker).

   • Exact drive model​ integrated (e.g., FC-202 or FC-302).

   • Included options​ (communication cards, specific I/O).

2. Power & Cooling:​ Ensure the electrical supply matches the 380-480V, 3-phase requirement. The IP55 enclosure relies on internal fan cooling; ensure adequate clearance around the unit as per installation guidelines.

3. Installation:​ The system is designed for easier installation but must be mounted, grounded, and connected to mains and motor by qualified personnel following local electrical codes.

4. Motor Compatibility:​ Suitable for standard three-phase AC induction motors rated for 25 kW at 400V. The motor's FLC must be ≤ 49A.

5. Accessibility:​ For commissioning and parameter changes, access to the drive's keypad or the use of configuration software via the communication port is required.

Note: This data sheet describes the typical ICOS Compact System 1 product family. For the definitive specification, detailed electrical drawings, and installation instructions for the specific Danfoss ICS1 25-15, always request the official product data sheet and manual from the supplier or Danfoss.