Allen-Bradley 5069-ECR Compact 5000 Ethernet Communication Rack

Allen-Bradley 5069-ECR communication rack. Holds 5069 I/O modules, connects via 5069-AEN2TR adapter. Supports up to 8 I/O modules.

Product: Allen-Bradley 5069-ECR Compact 5000 Communication Rack

The Allen-Bradley 5069-ECR is a 2-slot communication rack for the Compact 5000™ I/O system. It is used to create distributed or remote I/O nodes, housing 5069 series I/O modules and connecting them to a controller over an EtherNet/IP network via a 5069 adapter module.

Key Features

• Distributed I/O:​ Enables expansion of I/O away from the main controller chassis.

• Compact Form Factor:​ Space-saving design for mounting in control panels.

• Plug-in Modules:​ Supports all 5069 series I/O modules (digital, analog, specialty).

• Requires Adapter:​ Must be used with a 5069 series communication adapter (e.g., 5069-AEN2TR).

Technical Specifications

• Catalog Number:​ 5069-ECR

• Product Line:​ Compact 5000 I/O

• Device Type:​ 2-Slot Communication Rack

• Number of Slots:​ 2 (One for a required 5069 communication adapter, one for a 5069 I/O module)

• Maximum I/O Modules:​ 1 (plus 1 adapter module)

• Mounting:​ DIN-rail mount (35 mm)

• Power Supply:​ Powered by the connected 5069 communication adapter. Note: The adapter itself requires 24V DC power.

• Communication:​ Via the installed 5069 adapter module (e.g., EtherNet/IP)

• Network Connection:​ Determined by the adapter (e.g., 2-port RJ45 for 5069-AEN2TR)

• Dimensions (H x W x D):​ 135 mm x 60 mm x 87 mm (approximate)

Core Function & Configuration

The 5069-ECR is not a standalone device. Its function is to house and connect two modules:

1. Slot 0 (Left):​ Must contain a 5069 series communication adapter​ (e.g., 5069-AEN2TR EtherNet/IP Adapter).

2. Slot 1 (Right):​ Can contain one 5069 series I/O module​ (e.g., digital input, analog output).

The rack provides the mechanical enclosure and the internal backplane communication between the adapter and the I/O module.

Typical Applications

• Creating remote I/O drops on a machine

• Distributing I/O close to sensors/actuators to reduce wiring

• Adding specialized I/O modules (e.g., temperature, motion) to a CompactLogix or ControlLogix system over EtherNet/IP

Critical Note

The 5069-ECR is not functional by itself.​ It is a mandatory chassis​ that must​ be purchased with:

1. A 5069 series communication adapter​ (e.g., 5069-AEN2TR for EtherNet/IP).

2. At least one 5069 series I/O module​ (optional for initial purchase but required for function).

3. A 24V DC power supply​ to power the adapter.

This part number is typically purchased as part of a pre-configured kit or alongside the necessary adapter and I/O modules.

Note: Specifications are for product identification and comparison. This is a system component. For network planning, module compatibility, and system configuration, consult the official Allen-Bradley Compact 5000 I/O Systems Installation Instructions.

More Products

Pepperl Fuchs Safety Barrier

Allen Bradley PLC Controllers

SICK Instruments 

Festo Cylinder 

IFM Sensors