Endress+Hauser 51005148 Pressure Transmitter | Cerabar S PMC71 Specs

Endress+Hauser 51005148 Cerabar S PMC71 pressure transmitter specifications. Gauge/absolute pressure, 4-20mA HART, IP65, for process monitoring.

Endress+Hauser 51005148 Cerabar S PMC71 Pressure Transmitter

The Endress+Hauser 51005148 is a Cerabar S PMC71 series pressure transmitter designed for process pressure and level measurement in industrial applications. It features a piezoresistive sensor with ceramic measuring cell and provides reliable 4-20mA HART output for integration into control systems.

Key Features

• Ceramic Sensor:​ Robust ceramic measuring cell for high chemical resistance and long-term stability.

• HART Communication:​ 4-20mA analog output with HART protocol for remote configuration and diagnostics.

• High Accuracy:​ ±0.2% of span for precise pressure measurement.

• Compact Design:​ Compact housing suitable for space-constrained installations.

Technical Specifications

Model Number Interpretation (51005148)

The 51005148 is an order code​ rather than a traditional model number. In Endress+Hauser's coding system, this 8-digit number represents a specific configuration of the Cerabar S PMC71 transmitter. The code typically includes information about:

• Pressure range and type

• Process connection

• Wetted materials

• Output and communication options

• Certifications and approvals

Typical Applications

• Process pressure monitoring in chemical and petrochemical plants

• Level measurement in tanks and vessels (using hydrostatic principle)

• Pump and compressor protection

• Water and wastewater treatment systems

• Food and beverage processing

Important Selection & Installation Notes

1. Pressure Range Verification:​ The 51005148 order code specifies a particular pressure range. Always verify the exact range (e.g., 0-10 bar, 0-100 bar) before selection.

2. Process Connection:​ Confirm the thread type (G1/2" or NPT) and orientation (top, side, or bottom entry) for your installation.

3. HART Configuration:​ Requires a HART communicator or compatible software for configuration and calibration.

4. Zero Adjustment:​ May require zero adjustment after installation, especially for gauge pressure transmitters.

5. Mounting Position:​ For level measurement applications, ensure proper mounting height relative to the tank zero point.

Note: Specifications are based on the Cerabar S PMC71 series data. The exact configuration for order code 51005148 may include specific options. For complete technical data, dimensional drawings, and installation guidelines, consult the official Endress+Hauser Cerabar S PMC71 Technical Manual​ or use the Endress+Hauser Device Viewer tool with this order code.