Allen-Bradley 5069-IF8 Compact 5000 Analog Input Module | 8 CH

Allen-Bradley 5069-IF8 analog input module. 8 channels, 0-20mA/±10V, 16-bit. For high-density signal measurement.

Product: Allen-Bradley 5069-IF8 Compact 5000 Analog Input Module

The Allen-Bradley 5069-IF8 is an 8-channel, high-density analog input module for the Compact 5000™ and Controllogix 5580 I/O systems. It is designed for precise measurement of current and voltage signals from field transmitters and sensors.

Key Features

• High Channel Density:​ Eight isolated analog inputs in a single, compact module.

• High Resolution:​ 16-bit resolution for accurate measurement across the full range.

• Wide Input Range:​ Software-configurable per channel for voltage or current.

• Embedded Diagnostics:​ Channel-level fault detection (wire break, over-range, under-range).

Technical Specifications

• Catalog Number:​ 5069-IF8

• Product Line:​ Compact 5000 I/O

• Module Type:​ Analog Input, 8 Channels

• Input Signals (per channel, individually configurable):

  • Current: 0 to 20 mA, 4 to 20 mA

  • Voltage: ±10 V, ±5 V, 0 to 10 V, 0 to 5 V, 1 to 5 V

• Resolution:​ 16 bits

• Update Time:​ 4.5 ms per channel (maximum for all channels)

• Accuracy:​ ±0.05% of full scale (voltage), ±0.1% of full scale (current) at 25°C

• Input Impedance:​ Voltage: 2 MΩ; Current: 125 Ω

• Electrical Isolation:​ 500V AC between field side and bus, 250V AC between channels

• Module Power:​ 24V DC (supplied via the 5069 backplane or communication adapter)

• Power Dissipation:​ 2.4W typical

• Connection:​ Removable screw-clamp terminal block (supplied)

• Status Indicators:​ Module status (OK/FAULT) and channel status LEDs

• Width:​ 30 mm

Function

This module converts analog process signals (e.g., from pressure, temperature, or flow transmitters) into digital values for the Logix controller. Each input channel can be independently configured for range, filtering, alarms, and data format within the Studio 5000 Logix Designer® software.

Typical Applications

Used in 5069 I/O racks for high-density analog signal acquisition in:

• Process control systems

• Machine monitoring and data acquisition

• Batch processing

• Test and measurement stands

Important Note

This module is not a standalone device. It must be installed in a compatible 5069 I/O chassis, such as:

• A 5069 Compact I/O chassis​ (e.g., 5069-AENTR gateway, 5069-ECR rack), or

• A ControlLogix 5580 chassis​ with 5069 compatibility.

The module receives its operating power through this chassis. Always verify compatibility with your specific I/O system.

Note: Specifications are for product identification and comparison. For complete wiring diagrams, environmental ratings, and configuration details, consult the official Allen-Bradley 5069 I/O Modules Installation Instructions.

More Products

Pepperl Fuchs Safety Barrier

Allen Bradley PLC Controllers

SICK Instruments 

Festo Cylinder 

IFM Sensors